Solutions

Operational solutions built from EnrgTech devices and platform workflows.

These solution bundles turn EnrgTech hardware into targeted outcomes for buildings, portfolios, utilities, and mobile assets. Each one combines sensing, control, and connectivity for a specific business problem.

Built Environment

Circuit-Level Energy Monitoring

GatewayCurrent Transformer SensorsZigbee 3.0 Mesh

Track electrical behavior at the circuit level to expose waste, profile major loads, and establish a defensible baseline for energy programs.

Use Cases

  • Main and sub-panel monitoring in offices, retail, and multi-tenant properties.
  • Identifying abnormal load growth before it becomes a cost or maintenance issue.
  • Creating verified before-and-after baselines for retrofit programs.

Built Environment

Submetering and Cost Allocation

GatewayCurrent Transformer Sensors

Allocate utility costs more accurately by instrumenting circuits or tenant zones and bringing those readings into one reporting flow.

Use Cases

  • Commercial towers and mixed-use properties with shared services.
  • Campus-style sites where multiple occupants consume from common infrastructure.
  • Reducing disputes by replacing estimates with measured consumption.

Built Environment

HVAC Optimization and Thermostat Control

ActuatorsGatewayZigbee 3.0 Mesh

Retrofit thermostat and relay control so HVAC equipment can follow schedules, occupancy logic, and operator commands without full system replacement.

Use Cases

  • Office floor scheduling and after-hours setback strategies.
  • Hotel guest room temperature control tied to occupancy states.
  • Reducing simultaneous heating and cooling across zones.

Built Environment

Pump and Irrigation Automation

ActuatorsLoRaWAN ConnectivityGateway

Automate pumps and irrigation equipment based on field conditions so water and electricity are used only when they create value.

Use Cases

  • Landscape irrigation that responds to soil or environmental signals.
  • Water pumping schedules that avoid unnecessary runtime.
  • Remote outdoor infrastructure with limited local communications.

Distributed Assets

Remote Utility and Infrastructure Monitoring

LoRaWAN ConnectivityGateway

Extend visibility to remote utility points and outdoor assets that sit beyond the practical range of conventional indoor networks.

Use Cases

  • Water, chilled water, and energy telemetry across large campuses.
  • Open-area metering where trenching or dense networking is impractical.
  • Critical field assets that need periodic status updates and alarms.

Mobile Assets

Mobile Asset Telemetry

LoRaWAN ConnectivityGateway

Bring energy and status telemetry from moving or distributed assets into one platform so operations teams can monitor performance beyond fixed buildings.

Use Cases

  • Fleet-adjacent equipment and mobile support assets.
  • Temporary installations or movable field equipment.
  • Energy-aware asset programs spanning multiple operating zones.

Enterprise Operations

Portfolio Benchmarking

GatewayCurrent Transformer SensorsLoRaWAN Connectivity

Standardize telemetry across buildings and sites to compare performance, rank opportunities, and direct capital-free efficiency programs where they will matter most.

Use Cases

  • Retail chains comparing similar branches.
  • Hospitality portfolios prioritizing underperforming properties.
  • Industrial groups comparing utilities across production sites.

Reliability

Anomaly Detection and Alarm Escalation

GatewayCurrent Transformer SensorsZigbee 3.0 Mesh

Combine live sensing with rules and notifications so operational teams are alerted as soon as energy behavior departs from expected conditions.

Use Cases

  • Unexpected load spikes on refrigeration or HVAC circuits.
  • Early warning for equipment left running outside planned schedules.
  • Escalation workflows for energy, utility, and environmental exceptions.

Energy Optimization

Demand Reduction and Load Control

ActuatorsCurrent Transformer SensorsGateway

Measure high-consumption loads and automate selective control actions to reduce waste, manage peaks, and support practical energy optimization programs.

Use Cases

  • Peak shaving strategies for non-critical loads.
  • Demand management across shared facility infrastructure.
  • Automated shutdown of discretionary equipment outside target windows.

Savings Verification

Measurement and Verification Programs

Current Transformer SensorsGateway

Collect the granular data needed to prove that energy-saving measures are delivering real results and to support normalized performance reviews.

Use Cases

  • Before-and-after validation for retrofit projects.
  • Performance-based contracts where savings need evidence.
  • Internal sustainability and executive reporting with defensible numbers.

Built Environment

Hospitality and Multi-Room Energy Management

ActuatorsGatewayZigbee 3.0 MeshCurrent Transformer Sensors

Coordinate room-level sensing, control, and consumption monitoring so hospitality operators can reduce waste without sacrificing occupant comfort.

Use Cases

  • Guest rooms with automated HVAC control during vacancy.
  • Back-of-house load monitoring for kitchens and plant rooms.
  • Cross-property playbooks for consistent operational standards.

Field Operations

Remote Site Continuity and Offline Resilience

GatewayLoRaWAN Connectivity

Use edge storage and resilient communications to keep remote sites observable even when backhaul is unstable, then sync data once connectivity returns.

Use Cases

  • Telemetered sites with intermittent internet service.
  • Outdoor and rural infrastructure that needs local buffering.
  • Programs where missing data would weaken analysis or billing.

Mobile Assets

CAN J1939 Fleet Telemetry

GatewayCAN

Collect J1939 data from heavy-duty vehicles and mobile equipment to expose engine behavior, asset utilization, and operational inefficiencies in one fleet operations view.

Use Cases

  • Heavy-duty trucks and construction equipment that need engine and drivetrain telemetry.
  • Mixed fleets that want centralized monitoring of fuel, load, and runtime behavior.
  • Maintenance programs that rely on fault codes and operational hours from J1939 data.

Mobile Assets

OBD-II Vehicle Diagnostics

GatewayCANOBD-II

Use OBD-II connectivity to capture vehicle diagnostics, utilization patterns, and health indicators from light-duty vehicles without adding a separate telematics stack.

Use Cases

  • Service fleets that need quick visibility into check-engine events and health codes.
  • Operational programs that track mileage, idling, and vehicle usage patterns.
  • Light commercial vehicles where low-friction diagnostics visibility matters.

Mobile Assets

Vehicle Management and Tracking

GatewayCANLoRaWAN Connectivity

Combine vehicle telemetry, location awareness, and status reporting so operations teams can manage mobile assets, field equipment, and fleet workflows from one platform.

Use Cases

  • Fleet dispatch and status visibility across multiple operating zones.
  • Tracking mobile support equipment, trailers, and field-deployed assets.
  • Utilization reporting for vehicles that move between facilities and job sites.

Built Environment

Modbus Power Meter Integration

GatewayModbus

Connect Modbus-capable power meters and electrical devices into the EnrgTech platform for centralized monitoring, alarming, and reporting without replacing installed equipment.

Use Cases

  • Electrical distribution monitoring across switchboards and panels.
  • Power quality and energy trend collection from existing Modbus meters.
  • Sites that need to consolidate disparate meter data into one dashboard.

Built Environment

Modbus BMS and HVAC Integration

GatewayModbusActuators

Bridge Modbus-enabled HVAC controllers and building systems into EnrgTech so operations teams can combine monitoring, alarms, and optimization logic across existing infrastructure.

Use Cases

  • HVAC plants and building management systems that already expose Modbus points.
  • Facilities that need one platform view across cooling, heating, and electrical systems.
  • Optimization projects that depend on live BMS data without replacing the controls stack.

Industrial Operations

Modbus Industrial Equipment Monitoring

GatewayModbusLoRaWAN Connectivity

Bring Modbus-connected industrial assets into a broader operations view for runtime monitoring, fault detection, and remote reporting across plants and distributed equipment.

Use Cases

  • Pumps, compressors, and packaged equipment with Modbus interfaces.
  • Remote industrial skids and utility assets that need centralized monitoring.
  • Operations teams that want equipment alarms and telemetry in one workflow.

Safety and Compliance

AI Site Safety Monitoring

AI Camera DetectionGatewayCurrent Transformer Sensors

Use AI vision to detect unsafe behavior, restricted-area entry, and operational hazards, then pair those events with clips, snapshots, and related site telemetry for faster response.

Use Cases

  • PPE compliance checks and worker presence in restricted zones.
  • Slip, fall, obstruction, and unsafe-behavior incident detection.
  • Operational investigations with timestamped clips plus sensor context.

Safety and Compliance

Regulatory Incident Reporting

AI Camera DetectionGatewayModbus

Build evidence-backed incident reports by combining AI-detected events with visual proof, timestamps, and relevant operating conditions from connected systems and sensors.

Use Cases

  • Incident packages for safety audits and regulatory follow-up.
  • Evidence capture for environmental, operational, or access-related violations.
  • Centralized reporting that ties visual events to device and sensor history.

Mobile Assets

Vehicle and Plate Recognition

AI Camera DetectionGatewayCAN

Detect vehicles, read license plates, and create traceable movement records across entries, exits, depots, and operating zones for security and operations teams.

Use Cases

  • Gate entry and exit logging with vehicle and plate evidence.
  • Yard and depot monitoring for unauthorized or unexpected vehicle activity.
  • Vehicle identity workflows that support fleet and visitor management.

Advanced Analytics

Environment-Aware Incident Correlation

AI Camera DetectionGatewayLoRaWAN Connectivity

Combine AI detections with data from environmental sensors so each incident record captures what happened visually and what surrounding conditions were present at that moment.

Use Cases

  • Correlating smoke, heat, gas, occupancy, or humidity spikes with visual events.
  • Investigating site anomalies with both images and sensor timelines.
  • Creating richer reports for operations, safety, and compliance teams.