See the load behind the total
Monitor up to 12 current-transformer inputs from one device to compare circuits and understand where demand comes from.
EnrgTech hardwareENRG-CT-SENSOR
eForce · Circuit-level monitoring
eForce Sensor
Know which circuits are driving demand.
See beyond the total load. eForce brings 12 current-transformer channels into one enclosed sensor, helping you compare equipment, find unusual consumption, and make better-informed energy decisions.
12 CT channels · Zigbee connectivity · Electrical measurements
—
Checking price and availability…
- CT input channels
- 12
- Metrics per channel
- 6
- Link to CrossControl
- Zigbee
Key capabilities
Know which circuits are driving demand.
Understand more than current
Review active, reactive, and apparent power alongside current, power factor, and phase angle for a richer view of each monitored load.
Connect measurements to decisions
Send readings through CrossControl to EnrgTech dashboards for load comparisons, historical trends, and maintenance investigation.
Know your hardware
Technical specifications
Sensing & measurements
- Current inputs
- 12 current-transformer input channels
- Per-channel measurements
- Current, active power, reactive power, apparent power, power factor, and phase angle
- Voltage
- Shared voltage-reference measurement
- CT connections
- 12 × 3.5 mm input sockets for compatible CT sensors
- Measurement range
- Determined by the selected CT sensors and calibration; confirm for your installation
- Reporting
- Configurable reporting interval through CrossControl
Connectivity & operation
- Wireless link
- 2.4 GHz Zigbee to a compatible CrossControl gateway
- Power input
- 9–12 V AC through a compatible external adapter
- Local recording
- microSD logging support; storage card configuration is confirmed with your order
- Timekeeping
- Real-time clock with battery-backup support
- Firmware updates
- Wireless updates managed through CrossControl
- Product format
- Complete enclosed device
- Enclosure dimensions
- Approx. 134 × 72 × 24 mm (L × W × H), excluding connected plugs and cables
Built for real work
Where it fits
Equipment load studies
Compare monitored loads for HVAC, pumps, lighting, and other equipment to guide an efficiency investigation.
Operational comparisons
Build a circuit-level view of usage patterns across operating periods and evaluate the effect of operational changes.
Maintenance insight
Use changes in electrical measurements to support investigation of unusual equipment behavior.
Plan with confidence
Get the right fit for your installation.
Share the circuits, current ranges, conductor sizes, and electrical system you want to monitor. We can confirm compatible CT sensors, voltage-reference setup, gateway coverage, and accessories for your installation.
Before you order
Questions & answers
Does eForce need a gateway?
Yes. This eForce configuration sends measurements over Zigbee to a compatible CrossControl gateway. CrossControl connects those readings to the EnrgTech platform.
Are the CT clamps and power adapter included?
Accessory quantities and ratings are confirmed with your order. Choose CT sensors to match the circuit current and conductor size, and confirm the compatible AC adapter before installation.
Can it measure three-phase equipment?
The device provides 12 current inputs and a shared voltage reference. Tell us your phase arrangement before ordering so we can confirm a suitable measurement configuration for your electrical system.
How should I choose a measurement range?
The range depends on the selected CT sensor and calibration. Share your expected current and conductor size with EnrgTech so the sensors can be matched to your installation.
DiscoverCrossControl